Closed Corner Frames: Frame Sample 5235

Frame 5235 Description

Handcrafted from one of our largest mouldings, this frame has been popular for oversized contemporary artwork and mirrors. Layered and varying, this finish is aluminum over a red undercoat. The lip section is heavily distressed and rubbed through to the red, while the large beveled panel of this five-inch moulding relies on the layers of patina, heavy spatter and antiquing to create a unique and interesting textured look. It has a unique golden wheat color that has come to be a Frames By Edward Wright shop classic.

Order a Specifier of This Sample

Frame 5235 Pricing

Frame 5235 Specifications

Moulding: 690
Width: 5"
Corner: spline
Leaf: aluminum
Rabbet Lip Width: 1/4"
Rabbet Depth: 1 1/2"
Order a Specifier of This Sample

Click to view Larger Photo

How To Measure Your Artwork for Framing

Measure the length and height of the outer edge of your artwork, including mat if there is one.

Measure all four sides to make sure your artwork is square. If your artwork is not square, be sure to order a frame with a rabbet lip wide enough to cover the difference.

Enter your measurement in inches. For instance, if your frame measures 2'2" x 3'4", enter 26" x 40".

If you have any questions or concerns about your measurements, take your artwork to a professional framer to have it measured. Correct measurements are critical to building your frame. We are not responsible for frames which do not fit because the artwork was improperly measured

We will take the measurements provided by you, and cut the moulding's inside corners at the rabbet to these measurements.

We add a standard 1/8" allowance to each measurement for ease of mounting. For instance, if your order specifies 26" x 40", your frame will actually be cut at 26 1/8" x 40 1/8". Take this into consideration when measuring your frame. If you need your frame to be cut to an exact size with no allowance, be sure to indicate this by adding a note to your order.

How Frame Price is Calculated

Frames by Edward Wright pricing combines two charges:

The per foot charge applies to the work done to the entire surface of the frame, such as the finish or a carve along the length.
The corner charge applies to work that does not depend on the size of the frame, such as joining the corners or a carving in the corners only. Every frame has four corners, no matter what its size, so the corner charge for a particular sample is always the same regardless of size.

We add the per foot charge and the corner charge to determine the total cost of your frame, as follows:

(frame feet x per foot price) + corner price

What does frame feet mean? Frame feet is a precise calculation based on the following measurements:

height: provided by you, height of artwork
length: provided by you, height of artwork
moulding width: the thickness of the moulding which will be used to make your frame

The height and length, measured from your artwork, are the inner measurement of the frame. The outer measurement, or total frame feet, is calculated with this equation:

((Height + Length)*2 + MouldWidth*8)/12

How is shipping calculated?

Shipping prices are determined by size:

Frames with a total size of 11 feet and under are shipped via UPS, at a cost of $6 per foot.
Frames with a total size over 11 feet are shipped via Old Dominion, priced as follows:
- $9 per foot in the following states: Alabama, Arkansas, Georgia, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Virginia (except Manassas)
- $17 per foot to all other states
Contact us for shipping costs outside the US